LEK2SB-PTC1，LEK2SB-KTC1，LE12SB-PTC1，LE12SB-kTC1，LE33SB-pTC1，LE33SB-kTC1，LEF4SB-pTC1，LEF4SB-kTC1，LEH4SB-PTC1，
LEH4SB-kTC1，LE34SB-pTC1，LE34SB-kTC1，LEG4SB-pTC1，LEG4SB-kTC1，lek5Sb-pTC3，LEK5SB-KTC3，LEH5SB-PTC3，LEH5SB-KTC3，

LE03SB-PTC1，LE03SB-KTC1， LEK3SB-PTC1，LEK3SB-KTC1，LE44SB-PTC1，LE44SB-KTC1，LEG5SB-PTC3，LEG5SB-KTC3，LEH6SB-PTC3 ，

LEH6SB-KTC3，LEK7SB-PTC3，LEK7SB-KTC3，LEH7SB-PTC3，LEH7SB-KTC3，LVH7SB-WTSK*，LEJ8S2-PTCB* ，LEH8SB-PTCB*

LPK2EB-PTC1,LPK2EB-KTC1,LPB2EB-PTC1,LPB2EB-KTC1,LPD3EB-PTC1.LPD3EB-KTC1,LPF4EB-PTC1,LPF4EB-KTC1,LPH4EB-PTC1,LPH4EB-KTC1,
LPD4EB-PTC1,LPD4EB-KTC1,LPG4EB-PTC1,LPG4EB-KTC1,LPK5EB-PTC3,LPK5EB-KTC3,LPH5EB-PTC3,LPH5EB-KTC3,LPA3EB-PTC1,LPA3EB-KTC1,
LPK3EB-KTC1,LPK3EB-KTC1,LPB4EB-PTC1,LPB4EB-KTC1,LPE4EB-PTC3,LPE4EB-KTC3,LPG5EB-PTC3,LPG5EB-KTC3,LPH6EB-PTC3,LPH6EB-KTC3,
LPK7EB-PTC3,LPK7EB-KTC3,LPH7EB-PTC3,LPH7EB-KTC3,LVH7EB-WTSK*,LPJ8EB-PTCB*,LPH8EB-PTCB*

?所有型號標配: 三功能閥,注射閥, 底閥, 進出口軟管（標*的型號無三功能閥） ?電源:220V*大功率:300W
?配五功能閥需單獨訂貨
?PVC泵頭可選，價格與PVDF泵頭材質相同.

美國帕斯菲達pulsafeeder電磁計量泵LPK3EB-KTC1，加藥泵流量調節方式：脈沖+液位信號控制，泵頭材質：PVDF
*手動:頻率，沖程同時可調 *流量0.5-95升/小時，壓力2-21Bar *自動：可選4-20mA脈沖信號，液位信號接收功能 *21種機型
美國帕斯菲達pulsafeeder電磁計量泵LPK3EB-KTC1，加藥泵流量調節方式：脈沖+液位信號控制，泵頭材質：PVDF

泵的行程速率也可以通過輸入到標記［4-20 mA］終端的4-20 mA直流信號控制。
? 要使4-20 mA輸入對泵I的輸出速率起作用，自動/斷開/手動開關必須處于自動位置。
? 4-20 mA輸入信號按照下、圖影響泵的出力:
 4-20 mA 直流輸入功能（續）
? 信號線極性：
黑色 = 共用
白色 = 正極
極性錯誤會導致流量過大。
? 信號輸入阻抗為124歐姆。
? 卸下泵上標有4-20 mA的插座的蓋，用隨泵提供的極化線將控制電路連接到泵。將電線插入泵
上標有 4-20 mA 的插座。

PULSAtron Series E Plus Metering Pump

General Description
Pulsafeeder PULSAtron Series E Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset. The Series E Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 4-20mA DC and stop function inputs. Auto-Off-Manual switch.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.

Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump - Key Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Panel Mounted Fuse.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Indicator Lights, panel mounted.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Reliable metering performance.
• Rated "hot" for continuous duty.
• Leak-free, sealless, liquid end.

Includes:

A weighted foot valve/strainer assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 8' discharge tubing and Owners Manual